Common Toyota Tundra Problems and Solutions

The Toyota Tundra, a full-size pickup truck, is known for its reliability, strength, and performance.

The Tundra is the best option for people searching for a truck that can tow heavy loads, haul cargo, or go off-road.

It is also a luxurious vehicle with so many positive records. But as usual, the Toyota Tundra has some issues with its components.

As an auto mechanic, I have discussed solutions next to each problem in this article for your convenience.

Read this article for a clear and concise concept of Toyota Tundra’s problems.

Quick Navigation

Toyota Tundra Problems [12 Common Problems, Symptoms, Causes and Solutions]

Today I will highlight 12 major and most talked-about problems with the Toyota Tundra. They are:

  1. Toyota Tundra Transmission Problems
  2. Toyota Tundra Brake Problems
  3. Toyota Tundra Alternator Problems
  4. Toyota Tundra Radio Problems
  5. Toyota Tundra Air Injection Pump Problems
  6. Toyota Tundra Blind Spot Monitor Problems
  7. Toyota Tundra Engine Problems
  8. Toyota Tundra Flex Fuel Problems
  9. Toyota Tundra Ignition Switch Problems
  10. Toyota Tundra Speed Sensor Problems
  11. Toyota Tundra Sunroof Problems
  12. Toyota Tundra Transfer Case Problems

Let us learn about the Toyota Tundra’s common problems, their causes, symptoms, and solutions in detail.

1. Toyota Tundra Transmission Problems

Toyota Tundra Transmission Problems

Transmission issues with the Toyota Tundra are a typical concern with this particular truck model.

The most frequent issue is a cooling system breakdown that results in a mixture of coolant and fluid.

Other common problems that are found in the Toyota Tundra transmission are:

  1. You notice the transmission shifts gears more slowly than usual.
  2. The gears engage suddenly and roughly, also shaking the vehicle.
  3. Transmission fluid leaks from the transmission and causes overheating, transmission failure, and other problems.
  4. The clutch is cracked.

Causes of Toyota Tundra Transmission Problem

8 causes of Toyota Tundra transmission problems are:

  1. Transmission Sensor Damage: Transmission sensors send data to TCM about acceleration, RPM, and other factors. If sensors fail, TCM may fail and cause shifting delays, harsh shifting, and other issues.
  2. Dirty or Low Transmission Fluid: Transmission fluid keeps the transmission cool, lubricated, and prevents wear and tear. If fluid is dirty or low, the transmission overheats, wears out, and breaks down.
  3. Worn Transmission: The transmission’s moving parts corrode over time, which can cause slipping, grinding, and slow shifting.
  4. Broken Solenoids: Solenoids control transmission fluid flow and temperature. If a solenoid breaks, the transmission may not work properly.
  5. Torque Converter damage: A torque converter in an automatic transmission helps the car accelerate by multiplying the engine’s torque. If the torque converter malfunctions, the car may exhibit the signs mentioned above.
  6. Pedaling the clutch: Constantly pressing the clutch pedal can overheat and wear out the clutch.
  7. Harsh Driving: Harsh driving conditions for a Toyota Tundra transmission include off-roading, towing heavy loads, and speeding. These conditions can cause the transmission to wear out prematurely.
  8. Worn Gasket Pan: A worn gasket pan can cause transmission fluid to leak, which can lead to the symptoms mentioned above.

Symptoms of Toyota Tundra Transmission Problem

You can diagnose a Toyota Tundra transmission defect by looking at 10 main symptoms:

  1. The transmission hesitates to shift gears.
  2. The transmission makes erratic or incorrect gearshifts.
  3. The transmission loses power or vibrates when shifting gears.
  4. The transmission fluid level is low, or there is a leak underneath the car.
  5. The clutch engages too early or doesn’t engage properly.
  6. The transmission smells burnt.
  7. The check engine light is on.
  8. The transmission shifts harshly or jerkily.
  9. The car loses power when driving or climbing a hill.
  10. The transmission makes a noise when shifting gears.


  • Transmission Sensor Damage: Fix the damaged transmission sensors. Install a new sensor to replace the damaged one.

Modify the transmission control module (TCM) software. The new software may enable TCM to interface with transmission sensors more effectively.

  • Dirty or Low Transmission Fluid: Regularly swap out the transmission fluid. You must replace the transmission fluid in accordance with the manufacturer’s instructions.

Choose the correct transmission fluid type. Always use the right kind of transmission fluid on your Toyota Tundra.

  • Worn Transmission: Restore or repair any damaged or worn-out transmission parts. Replace the damaged components if the issue is severe.
  • Broken Solenoids: Change the defective solenoids. Reinstall those solenoids that have detached with new ones. Upgrade TCM’s software. The upgraded software may provide better communication between solenoids and TCM.
  • Torque Converter damage: Rebuilt torque converter Repairing the torque converter is expensive, but it is a cutting-edge fix.
  • Cracked Clutch: Check the clutch and repair or replace it if necessary.
  • Harsh Driving: Ignore off-road driving. Check the transmission every 45,000 miles if you must drive off-road to keep your vehicle in good health.
  • Worn Gasket Pan: Replace the deteriorated gasket pan with a brand-new one to prevent transmission fluid leakage.

2. Toyota Tundra Brake Problems

Toyota Tundra’s brake problems may vary from small ones, like old brake pads, to larger ones, like brake cylinder failure. Some typical types of brake issues are:

  1. A rubbery or sticky brake pedal.
  2. A clicking noise when braking.
  3. Brake lights turn on while the truck is not braking.

Causes of Tundra Brake Problems

6 causes of Toyota Tundra brake problems are:

  1. Old brake pads: Brake pads lose some of their ability to stop the vehicle as they age. As a result, the brakes may sound screeching or crunching, and the brake pedal may feel fuzzy or rubbery.
  2. Deformed rotors: The metal discs called rotors are what the brake pads contact to slow the car downward. The brakes may tremble and generate a clicking sound if the rotors get deformed.
  3. Brake fluid leak: The chemical substance known as brake fluid transmits the force from the brake pedal to the brake calipers. The brakes can turn rubbery or fragile, and the brake pedal may drop to the ground if there is a brake fluid leak.
  4. Blocked brake lines: The brake lines are hoses that transport the brake fluid into the brake calipers. The supply of braking fluid might be restricted if the brake hoses block, which will reduce the effectiveness of the brakes.
  5. Air in brake lines: As you push the brake pedal, the pedal on your vehicle can fall to the ground due to wind in the brake lines, which can make the brakes seem rubbery or mushy.
  6. Broken brake parts: The braking system is constructed of several separate parts, each of which can malfunction and lead to brake issues. Brake calipers, rotors, pads, and hoses are a few typical braking parts that can malfunction.

Symptoms of Tundra Brake Problems

You will find 5 main symptoms of Toyota Tundra brake problems in your vehicle:

  1. The brake pedal seems mushy or rubbery.
  2. While you press the brake, the brake pedal drops to the ground.
  3. While braking, the brakes seem unequal and pull to one side.
  4. You hear the sound of crunching or hissing brakes.
  5. Brake fluid seeps, and you see the brake warning light flashing.


  • Old brake pads: Replace brake pads. Install brand-new brake pads in place of the old ones.
  • Deformed rotors: Replace rotors. When you change the deformed rotors, there will be no clicking sound anymore.
  • Brake fluid leak: Repair the brake fluid leak. Check the whole brake system for leaks and repair as needed.
  • Blocked brake lines: Flush brake lines. As you drain the brake lines, all dirt and clogs will flush out.
  • Air in brake lines: Bleed brake lines. It prevents air from entering the lines.
  • Broken brake parts: Replace broken brake parts such as rotors, pads, etc.

3. Toyota Tundra Alternator Problems

Toyota Tundra Alternator Problems

The alternator is a device that generates electricity to power the car’s electrical system.

If it malfunctions, the car will not start or function properly.

You will face the following problems when your vehicle’s Alternator fails:

  1. Battery drains, and your vehicle doesn’t start.
  2. Your vehicle’s headlights become dimmer.
  3. You cannot properly operate power windows.
  4. Alternator stops charging after running your truck.

Causes of Tundra Alternator Problems

4 main causes of Toyota Tundra alternator problems are:

  1. Old or broken bearings: The alternator’s bearings can wear out or break, preventing the alternator from spinning properly. This can cause the alternator to malfunction or fail.
  2. Regulator malfunction: The alternator regulator controls the amount of voltage the alternator produces. If the regulator malfunctions, the alternator may produce too much or too little voltage, which can damage the alternator or other electrical components in the vehicle.
  3. Cabling issues: The alternator is wired into the vehicle’s electrical system. Old or damaged cables can cause problems with the alternator’s operation.
  4. Internal issues: The alternator is a complex mechanical device, so, internal problems can develop with time. The problems may be overheating, excessive vibration, or manufacturing defects.

Symptoms of Tundra Alternator Problems

There are 4 main symptoms of Toyota Tundra alternator problems:

  1. Dim headlights are a sign that an alternator fails to generate sufficient power while the vehicle’s engine is operating.
  2. The battery light on the instrument cluster illuminates when the alternator stops correctly recharging the battery, signaling a problem.
  3. If the vehicle fails to ignite, it means the starter unit isn’t getting sufficient power from the alternator.
  4. Alternator issues can sometimes manifest as further electrical issues, including a broken radio or a window that won’t go downward.


  • Old or broken bearings: Replace the bearings. When you replace the bearings, the alternator will be able to operate properly again.
  • Regulator malfunction: Inspect the regulator and replace it if necessary.
  • Cabling issues: Repair or replace the alternator cables as necessary. You must connect the right type of alternator cable to your Toyota Tundra alternator.
  • Internal issues: Overhaul or replace the alternator. However, replacing or overhauling an alternator is often not cost-effective.
  • Alternator stops charging: Test and replace the alternator and install a new one.

4. Toyota Tundra Radio Problems

In the Toyota Tundra, radio faults may vary from small issues like crackling to increasingly major ones like the radio not functioning completely.

Some common types of Toyota Tundra radio difficulties include:

  1. The radio switched off itself.
  2. The audio broke out.
  3. The radio is failing to recognize upcoming stations.

Causes of Toyota Tundra Radio Problems

4 causes of your Toyota Tundra’s radio problems are:

  1. Software Glitches: Sometimes, the Toyota Tundra radio malfunctions due to software glitches. For example, it displays incorrect information or does not give the correct result of the command.
  2. Hardware Failure: Over time, the radio’s hardware can fail. Mainly hardware problems are display, sound system, etc. Sometimes the radio won’t even turn on.
  3. Water or Moisture Damage: If the radio is exposed to rain, snow, or moisture, water or moisture can get into the radio.
  4. Physical Harm: If the radio is dropped, hit, or subjected to excessive vibration, it can suffer physical harm.

Symptoms of Tundra Radio Problems

In this case, you may find these 4 signs when your Tundra’s radio has issues:

  1. The radio does not turn on.
  2. The radio displays the wrong information.
  3. The radio does not respond to commands.
  4. The speakers sound distorted.


  • Software Glitches: First, reset the radio. This will clear the radio’s whole memory and may solve the problem. If the rest don’t work, update the radio’s software. In this way, you will install the latest software, which may solve the problem.
  • Hardware Failure: When it’s about hardware failure, replace the radio.
  • Water or Moisture Damage: Dry up the radio. But you may not dry it up if the radio is exposed to water or moisture for a long time.  If you cannot dry up the radio, replace it.
  • Physical Harm: When the radio is physically harmed, try to repair it yourself or with the help of a professional. If it is severely damaged, replace the radio.

5. Toyota Tundra Air Injection Pump Problems

The Toyota Tundra’s Air Injection Pump supplies clean air to the exhaust manifold to help burn hazardous pollutants.

Toyota Tundras frequently experience issues with their air injection pumps.

The most common examples of air injection pump issues are:

  1. You notice increased emissions in the air.
  2. The engine’s performance may decrease in terms of power, fuel economy, and a harsh idle.
  3. Your vehicle has a rough idle or suddenly halts when you start it.

Causes of Tundra Air Injection Pump Problems

4 major causes of Toyota Tundra air injection pump problems are:

  1. Corrosion: The air injection pump is located in the exhaust manifold. As the place maintains a hot and humid environment, it can lead to corrosion of the pump’s internal components, which can cause the pump to fail.
  2. Water or Moisture Damage: If the air injection pump gets wet due to exposure to rain, snow, or condensation, it can malfunction.
  3. Physical Harm: When dropped or hit, the AIP can be damaged and fail to work.
  4. Age: Gradually, air injection pumps can fail. Usually, it works for a vehicle’s 100,000 miles.

Symptoms of Tundra Air Injection Pump Problems

You may see the 4 signs when the air injection pump has issues:

  1. You see the check engine light on.
  2. Engine power reduces.
  3. The engine is hard to start.
  4. Your vehicle may emit excessive emissions.



  1. If the pump is only slightly corroded, clean it. Thus, you can extend the lifespan.
  2. If the AIP is totally damaged, replace it.

Water or Moisture Damage

  1. Dry up the air injection pump. But you may not dry it up if the AIP is exposed to water or moisture for a long time.
  2. If you cannot dry up the pump, replace it.

Physical Harm

  1. When the air injection pump is physically harmed, try to repair it yourself or with the help of a professional.
  2. If the air injection pump is severely damaged, replace it.

Age: If the pump is too old, you must replace it.

6. Toyota Tundra Blind Spot Monitor Problems

A safety feature known as a blind Spot Monitor (BSM) employs radar detectors to identify vehicles that are in your blind zones.

The BSM will notify you visually or audibly if a vehicle is found in your blind zone.

The Toyota Tundra has recently been experiencing problems with its blind-spot monitors.

One sign of a blind spot monitor issue is when the warning lights turn on, even if no car is in the blind area.

Causes of Tundra Blind Spot Monitor Problems

3 causes of the Toyota Tundra blind spot monitor are:

  1. Defective sensors: The BSM sensors can become defective with time, and the whole system can malfunction.
  2. BSM Wiring: The BSM sensors’ connection to the control unit may decrease gradually, leading to system failure.
  3. Software error: If there is any error in the BSM software, the software cannot work properly and causes the blind spot monitor to malfunction.

Symptoms of Tundra Blind Spot Monitor Problems

5 signs of blind spot monitor problems are:

  1. You will see the blind spot monitor light is always on, but there is no car in the blind spot.
  2. The BSM light flashes when there is no car in the blind spot.
  3. No light from the blind spot monitor indications.
  4. You will not hear the BSM warning sound.
  5. The BSM system turns off completely.


  • Defective sensors: Replace the defective BSM sensors. It is usually a reasonable repair.
  • BSM Wiring: If the BSM wiring is broken, you will need to repair or replace the wiring. According to the damage, you may pay more or less. Usually, BSM wiring costs $3 to $8 per square foot.
  • Software error: If there is a software error in the BSM software, the software will need to be updated. A skilled mechanic can usually complete this relatively simple repair.

7. Toyota Tundra Engine Problems

You can face the following engine problems with the Toyota Tundra’s engine:

  1. Failure in the air injection pump
  2. Failure in the exhaust manifold
  3. Coolant like Strawberry-milkshake color
  4. engine knocking sound
  5. Oil leaking in the ground
  6. reduced oil pressure
  7. Overheating

Causes of Toyota Tundra Engine Problems

5 causes of Toyota Tundra engine problems are:

  1. Inadequate servicing: Applying the incorrect type of oil or missing an engine oil change can cause engine issues.
  2. Engine overheating: This condition can harm the engine parts, such as the head gasket and the valves.
  3. Faulty components: Engine problems can also result from worn-out or faulty engine components, such as the timing belt, hydraulic pump, or ignition coil.
  4. Particles and Dirt: Particles and dirt that build up inside the engine can cause problems, such as clogged oil or fuel lines.
  5. Accidents: Collisions with another vehicle can damage the engine, even if it’s just a rear-end accident.

Symptoms of Toyota Tundra Engine Problems

Here are 5 symptoms of Toyota Tundra engine problems:

  1. Engine oil leaks or seeps on the ground.
  2. You see the temperature gauge rise for engine overheating.
  3. You hear an engine knocking sound.
  4. The engine misfires, and the check engine light turns on.
  5. When you drive the vehicle, the engine may stall unexpectedly.


Inadequate servicing:

  1. Use the correct engine oil for your Toyota Tundra. In this case, you can use 0W-20 synthetic engine oil, which is the best.
  2. Change the engine oil every 5,000 miles.

Engine overheating:

  1. Inspect the coolant level and add if needed. If there is a leak in the coolant system, repair it as soon as possible.
  2. Ensure the proper functioning of other components like the radiator fan, thermostat, water pump, head gasket, etc.
  3. Since the engine is the most important part of the car, get it checked by a good mechanic to avoid future accidents.

Faulty components:

  1. Replace any engine parts that have been damaged or worn out.
  2. Check the engine frequently for wear and tear indicators.

Particles and dirt:

  1. Regularly clean the engine to get rid of dirt and other particles.
  2. Use an excellent oil filter to capture dirt and particles.


  1. Even though there is no obvious damage, have the engine examined by a mechanic after an accident.
  2. Fix any engine damage as quickly as possible.

8. Toyota Tundra Flex Fuel Problems

Toyota Tundras have recently been experiencing flex fuel issues. Flex-fuel cars can run on E85, a mixture of gasoline and ethanol.

Nevertheless, some flex-fuel Tundras have had trouble operating on E85.

Flex fuel issues can cause a Toyota Tundra truck to operate poorly or not start at all when it is fueled with E85.

Causes of Tundra Flex Fuel Problems

3 causes for Toyota Tundra Flex fuel problems:

  1. Improper fuel mixture: If the fuel mixture in the fuel tank is not properly proportioned, engine misfires, stalling, and rough running may occur. The exact fuel ratio of a flex fuel vehicle is 85% Gasoline and 15% Ethanol.
  2. Faulty fuel system components: Flex-fuel vehicles may also experience issues due to old or broken fuel system parts, including fuel filters, fuel pumps, and fuel injectors.
  3. Engine problems: Flex-fuel vehicles may also experience issues due to engine issues like broken bearings or a faulty spark plug.

Symptoms of Tundra Flex Fuel Problems

6 signs of Toyota Tundra Flex fuel problems:

  1. Engine will misfire.
  2. The engine will run rough.
  3. The engine may stop suddenly or stall.
  4. Check engine light flashes.
  5. The engine may start hard in cold weather.
  6. Fuel economy may decrease.


  • Improper fuel mixture: Inspect the fuel mixture. Examining the fuel mixture is the first step in diagnosing flex-fuel issues. You should keep the ratio of the fuel at 85%–87% gasoline and 15%–13% ethanol.
  • Faulty fuel system components: Replace faulty fuel system components such as the fuel filter, fuel pump, or fuel injector.
  • Engine problems: Repair the engine problem that is related to the issue. The issue may be a faulty spark plug, a clogged fuel injector, worn piston rings, or damaged valves.

9. Toyota Tundra Ignition Switch Problems

The Toyota Tundra often has ignition switch problems.

The ignition switch can malfunction gradually, which can prevent the truck from starting, or the truck can stall just after starting.

Causes of Tundra Ignition Switch Problems

3 causes of Toyota Tundra ignition switch problems include:

  1. Faulty or Old ignition switch: Your vehicle’s ignition switch can wear out with time or may be faulty. As a result, the switch may not turn the car on or cause it to halt after starting.
  2. Broken wiring: The ignition switch can also become disconnected if the wires connected to it are worn, frayed, cut, or melted.
  3. Ignition lock cylinder problems: The ignition lock cylinder is the part of the ignition switch that turns the key. If it gets damaged or worn out, the ignition switch may not work.

Symptoms of Tundra Ignition Switch Problems

There are 4 signs of Toyota Tundra ignition switch problems:

  1. Your vehicle may not start.
  2. Your vehicle starts and immediately halts.
  3. The key will fail to turn the ignition switch.
  4. While turning the key, the ignition switch makes a clicking noise.


  • Faulty or Old ignition switch
  1. The first step is replacing the faulty or worn-out ignition switch.
  2. If the ignition switch is dirty, clean the ignition switch with an ‘electrical contact cleaner’.
  3. If the ignition switch is not aligned properly, it may not be able to turn properly. You can adjust the ignition switch by loosening the screws that hold it in place and then moving it into the correct position.
  • Broken wiring: If you find broken wires connected to the ignition switch, repair the wires. You can solder the wires back together or replace them.
  • Ignition lock cylinder problems: As for the ignition switch, inspect the ignition lock cylinder and use an electrical contact cleaner to clean it. Similarly, replace the cylinder if it is worn out or faulty.

10. Toyota Tundra Speed Sensor Problems

If there are issues with the speed sensor, the speedometer may not function properly, and you may see the check engine light flash on.

The most common Toyota Tundra speed sensor problems include:

  1. The ABS light turns on.
  2. The truck only moves forward slowly, or perhaps not.
  3. You feel vibrations when driving the truck.
  4. The truck loses its power and cannot perform properly.

Causes of Toyota Tundra Speed Sensor Problems

There are 3 major Toyota Tundra speed sensor problems:

  1. Damaged or old speed sensor: Water, other pollutants, and roadway rubble can damage the speed sensor, which is the most frequent cause of speed sensor problems. It can also weaken with time.
  2. Broken wiring: Corrosion or breakage to the wiring can prevent the vehicle’s ECU from receiving accurate results from the speed sensor. Replace the wires if necessary.
  3. Computer problems: Rarely, your vehicle’s ECU can fail and interfere with the speed sensor.

Symptoms  Toyota Tundra Speed Sensor Problems

4 signs of Toyota Tundra speed sensor problems are:

  1. The speedometer may display inconsistently, or perhaps not.
  2. The check engine light may illuminate.
  3. The transmission can shift randomly, or perhaps not.
  4. You may see the ABS light on.


  • Damaged or old speed sensor
  1. A clogged or dirty speed sensor may be unable to send accurate readings to the ECU. So, at first, clean the speed sensor with an electrical contact cleaner.
  2. If the speed sensor is too old, replacing it will be the most accurate solution.
  • Broken wiring: If you find speed sensor wires broken, repair the wires. You can solder the wires back together. Replace the wires if necessary.
  • Computer problems: Inspect the ECU. Try to have it checked by a professional mechanic. If the ECU is beyond repair, replace it.

11. Toyota Tundra Sunroof Problems

The Toyota Tundra has been reported to have sunroof issues.

These issues can include leaks, a sunroof that does not open or close properly, and, in some cases, the sunroof may break down or shatter.

Causes of Tundra Sunroof Problems

4 main causes of Toyota Tundra sunroof problems are:

  1. Sunroof motor or sunroof assembly: A problem with the motor or sunroof component, electric issues, particles, or general wear and tear can cause the sunroof to not open or close properly.
  2. Leaks: Corrosion, damage, or poor installation can cause sunroof seals to fail, which may allow water to seep into the cabin.
  3. Binding: You may find it difficult to slide open or shut the sunroof when the sunroof binds or becomes jammed. Here, the culprit may be debris, dirt, or a manufacturing defect.
  4. Old or damaged sunroof tracks: The sunroof’s sliding tracks can get old or damaged, making it hard or impossible to open or close.

Symptoms of Tundra Sunroof Problems

You may find these 4 signs when your Tundra’s sunroof has issues:

  1. The sunroof may not open or close properly.
  2. The sunroof may leak water into the cabin.
  3. The sunroof may bind or get stuck.
  4. The sunroof may make noise when opening or closing.


  • Verify the motor: If the motor is not working properly, it will need to be replaced.
  • Sanitize the sunroof component: If the sunroof assembly is dirty, it may not be able to move properly. You can clean the sunroof assembly with water and mild detergent.
  • Lubricate the sunroof assembly: If the sunroof assembly is not lubricated properly, it may not be able to move properly. You can lubricate the sunroof assembly with a lubricant specifically designed for sunroofs.

12. Toyota Tundra Transfer Case Problems

When your Toyota Tundra has a transfer case issue, it may not be able to shift into a four-wheel drive or may lose power while in a four-wheel drive.

Inability to engage four-wheel drive or loss of power while in the four-wheel drive are all major problems in a Toyota Tundra transfer case.

Causes of Toyota Tundra Transfer Case Problems

4 causes of Toyota Tundra transfer case problems:

  1. Low fluid levels: The transfer case needs the correct amount of fluid to work well. If the transfer case’s fluid level is too low, it may overheat and break down.
  2. Damaged or worn gears: The transfer case’s gears may become damaged or worn out over time. The transfer case may therefore produce a sound, waiver, or not latch correctly as a result of this.
  3. Faulty solenoids: Solenoids in the transfer case control fluid flow through the gears. If the solenoids are defective, the transfer case may break down.
  4. Harsh driving conditions: If you drive in challenging circumstances, including navigating rough terrain, it can be quite taxing on your vehicle’s transfer case and may result in issues.

Symptoms of Toyota Tundra Transfer Case Problems

3 major signs of Toyota Tundra transfer case problems are:

  1. You can hear noise from the transfer case.
  2. The transfer case may slip or fail to respond properly.
  3. You may see the check engine light on.


  • Low fluid levels
  1. Check the fluid level with a dipstick and refill the fuel if necessary.
  2. If the fuel is too old or contaminated, drain it.
  • Damaged or worn gears: Inspect the transfer case first. If the damage is not too severe, try to repair it. Now, observe the gears. Replace the worn gears.
  • Faulty solenoids: Examine the solenoids to see if they are damaged. Fix them according to the manual.
  • Harsh driving conditions: Avoid driving in harsh conditions, and take extra care when you do. Service your Tundra’s transfer case every 40,000 miles.

Note: An important caution for you is not to ignore your vehicle’s problems whenever you face them. Consult a professional mechanic if you notice any issues with your vehicle.

Is the Toyota Tundra a Reliable Truck?

The Toyota Tundra is reliable due to its long track record of reliability, high-quality components and materials used during construction, and long-lasting design.

Toyota built the Tundra using premium components and materials.

J.D. Power rated the Toyota Tundra as the best starting grade full-sized pickup vehicle in 2022.

The Tundra has a 3.5 Liter engine that gets up to 22/28 mpg city/highway.

The Toyota Tundra has been gaining popularity with time, so for those who are looking for a reliable vehicle, the Tundra can be the best option.


What problems do Toyota Tundras have?

The Toyota Tundra has frequent problems, such as air injection pump breakdown, exhaust manifold fractures, and strawberry milkshake coolant.

There have also been reports of ignition switch troubles, flex-fuel system problems, and sunroof concerns.

Toyota has recalled certain Tundras due to these issues and others.

Did Toyota recall Tundra for brake problems?

Toyota recalled certain Tundras with 5.7L engines from 2004 to 2006 because the brake master cylinder could fail, which could cause the brakes not to work properly.

Toyota repaired the affected vehicles free of charge.

Can 2008 Toyota Tundra radio volume problems be fixed?

The radio loudness issues on 2008 Toyota Tundras can be fixed by replacing the radio control module.

The radio control module is the cause of the issue.

A certified technician or authorized retailer can replace the module.

Does the Toyota Tundra 5.7l sr5 2017 have any problems?

There have been complaints about issues with the 2017 Toyota Tundra 5.7L SR5.

These issues include transmission problems, electrical problems, and engine oil leaks.

Toyota has recalled certain 2017 Tundra models, but these issues are not prevalent.

What is the most common issue with Toyota Tundra?

The Toyota Tundra’s most common problem is the failure of the air injection pump.

The air injection pump helps reduce emissions but can wear down over time.

If the air injection pump fails, the engine may run poorly and emit more pollutants.

Do Toyota Tundra last a long time?

Yes, Toyota Tundras have a reputation for being robust and reliable.

Most Tundras can travel over 200,000 miles before experiencing major issues.

Nevertheless, Tundras can experience issues similar to any other vehicle, so you must get them serviced frequently.

Final Thoughts

I have discussed the potential problems with the Toyota Tundra in detail in my article.

I hope now you are clear about Toyota Tundra’s problems.

So, if you notice any problems with your Tundra, contact a qualified mechanic immediately and get the problem fixed as soon as possible.

Leave a Comment