Toyota Tundra Fuel Pump Reset DIY Method

The fuel pump in your Toyota Tundra is an electrical device that supplies fuel to the internal combustion engine. Sometimes, you may need to reset your Toyota Tundra’s fuel pump.

You may have to reset the pump due to a malfunctioning fuel pump relay or if you recently replaced the fuel pump.

In either case, resetting the fuel pump will clear the relay’s memory and allow the fuel pump to start working normally again.

Toyota Tundra Fuel Pump Reset [Apply 6 Steps]

You can reset your Toyota Tundra’s fuel pump by following these 6 steps: 1. Locating the fuel pump relay, 2. Disconnecting the battery, 3. Removing the fuel pump relay, 4. Waiting for 30 seconds, 5. Replacing the fuel pump relay, 6. Reconnecting the battery.

I have explained the steps below.

Step 1: Locate the Fuel Pump Relay

A tiny switch called a fuel pump relay controls the power supply to the fuel pump.

When you switch on the key, the fuel pump relay closes, and turning on the fuel pump allows the fuel pump to start supplying the engine with fuel.

First, locate the fuel pump relay.

You will find the fuel pump relay in the fuse box under the hood.

Step 2: Disconnect the Battery

The fuel pump relay’s history stays stored in the battery’s memory.

Unplug the battery; it will reset the fuel pump back to its factory settings.

Step 3: Remove the Fuel Pump Relay

Remove the fuel pump relay.

It will prevent the engine from jumping, and you can work safely without electrocution.

Step 4: Wait 30 Seconds

Wait for 30 seconds. After 30 seconds, the fuel pump completes its starting phase, priming itself and preparing to start the engine.

Step 5: Replace the Fuel Pump Relay

Replace the fuel pump relay, which will power up the pump again.

Step 6: Reconnect the Battery

Reconnect the battery. You can start the engine now.

Thus, you can reset your Toyota Tundra’s fuel pump.

What if Resetting the Fuel Pump Fails to Fix the Issue?

If it still doesn’t work after you reset the fuel pump, there is a problem elsewhere in the fuel system.

Other possible pests are:

  • Faulty fuel pump
  • A malfunctioning fuel pump relay
  • A blocked fuel filter
  • A leaky or damaged fuel line
  • An issue with the ignition switch

If your fuel pump does not work after checking for all these problems, have your Toyota Tundra diagnosed by a qualified mechanic.

Prevent the Need to Reset the Fuel Pump on a Toyota Tundra in the Future

You can keep your Toyota Tundra fuel pump from needing to be reset by following these four rules:

  1. Always keep the fuel tank full to prevent the fuel pump from running dry.
  2. Change the fuel filter regularly to prevent it from getting blocked.
  3. Check the fuel line for leaks regularly.
  4. Avoid driving in scorching weather to avoid adverse effects on the fuel system.

Final Thoughts

In this article, I have described the procedures to reset the Toyota Tundra fuel pump easily.

If you have trouble resetting the fuel pump, contact an auto mechanic first.

Finally, comment below if you have further questions.

You may also be interested to learn:

Leave a Comment