How to Turn Off Maintenance Light on RAV4

Your Toyota RAV4’s maintenance light indicates it’s time for regular maintenance. Many other things, like an engine oil change, tire rotation, or fluid check, can cause the light to turn on.

You can turn off and reset the light by taking a few easy steps. The exact instructions may change according to the year and model of your RAV4.

Check your owner’s manual for comprehensive guidance about the maintenance light.

In this article, I have discussed how you can turn off the maintenance light on your Toyota Rav4.

What Does It Mean When Maintenance Required Light is On Toyota RAV4

A Toyota RAV4’s maintenance light serves as a signal when it is time for the vehicle’s regular service. It covers procedures including fluid checks, tire rotations, and oil changes. The word “MAINT” is typically enclosed in a triangle that is either yellow or orange. It is located on the vehicle’s dashboard.

The maintenance light turns on after a specific number of miles, typically between 5,000 and 10,000. Nevertheless, the precise interval may change based on the vehicle’s make and model year. Following the recommended maintenance program will help you keep your vehicle in good working order and prevent expensive repairs in the future.

You should take your vehicle to an experienced mechanic to have it maintained if the maintenance light flashes. Ensure resetting the maintenance light after the mechanic completes the required maintenance procedures.

Why is My Maintenance Required Light on Toyota RAV4

Depending on what occurs first, the maintenance light is set to turn on every 5,000 miles (8,000 km).

There are a few causes for the Toyota RAV4 maintenance light to appear. The most frequent explanation is that the engine oil needs to be changed.

Five other causes are:

  1. Tire rotation is required.
  2. Brake maintenance is required.
  3. You need to top off the fluid.
  4. Call for a diagnostic examination.
  5. System failure in the SUV.

Take your Toyota RAV4 to a skilled auto mechanic to get it checked out if the maintenance light appears. Neglecting the maintenance light might seriously harm the engine.

How to Turn Off Maintenance Light on Toyota RAV4

When your Toyota RAV4 needs regular service, like an oil change, the maintenance light flashes to let you know.

To turn off the maintenance light on your own, follow these 6 steps:

  1. Turn the ignition key to the “ON” position after inserting the key. It is the position right before the SUV starts.
  2. On the dashboard, press and hold the trip meter reset button.
  3. Turn the “OFF” key while the trip meter reset button is down.
  4. Hold the trip meter reset button for an additional 10 seconds.
  5. Press and release the reset trip meter button.
  6. Now is the time to reset the maintenance light.

After completing these instructions, if the maintenance light still does not go off, try doing it once or twice.

Toyota Rav4 Maintenance Schedule

The 6-month/5,000-mile interval is the basis of the Toyota RAV4 maintenance schedule. Accordingly, you must maintain routine performance at least twice a year or whenever your vehicle has driven 5,000 kilometers, whichever occurs first.

According to the age and mileage of your SUV, you will need to carry out different maintenance procedures; however, some typical ones are as follows:

  • Replace the engine oil and oil filter.
  • Replace cabin air filters.
  • Replace the engine air filters.
  • Rotate your tires.
  • Brake inspection.
  • Check the fluid levels.
  • Belt inspection.
  • Replacement of the spark plug.

Try to follow the owner’s manual, which contains the exact maintenance schedule for your SUV.

How to Reset Toyota RAV4 Maintenance Light

The Toyota RAV4 maintenance light indicates when regular upkeep, like an oil change, is required for your SUV.

To reset the maintenance light, follow these 5 steps:

  1. Turn the ignition key to the “ON” position after inserting the key. It is the position shortly before the automobile starts.
  2. On the instrument panel, hold down the trip meter reset button.
  3. Turn the key to the “OFF” position while holding the trip meter reset switch down.
  4. Hold the trip meter reset button for an additional 10 seconds.
  5. Press and release the reset trip meter button.

And finally, the maintenance light will be reset.

After completing these instructions, if the maintenance light still does not go off, try doing it once or twice. You may have to take your vehicle to a Toyota dealership to have the maintenance light reset if it fails to turn off after a while.

You can quickly reset the maintenance light on your Toyota RAV4 and ensure your vehicle gets regular service by following the above instructions.

Difference Between Maintenance Light Vs Check Engine Light

What are the differences between a maintenance light and a check engine light?

Look at the chart below to know the difference.

Maintenance Light

Check Engine Light

Yellow

Red

MAINTENANCE REQUIRED

CHECK ENGINE
Reminder for regular maintenance

Indicates a problem with the engine or emissions system

After a certain number of miles or months

When there is a problem with the engine or emissions system

Take your car in for maintenance

Take your car to a mechanic to have the problem diagnosed and repaired

Tips to Prevent Maintenance Light on Toyota RAV4 in the Future

Maintain the manufacturer’s suggested maintenance plan to keep your SUV running smoothly and reduce wear and tear. Use high-quality lubricants and filters to ensure the engine and other parts are adequately maintained and secured.

Drive carefully to prevent undue strain on the engine and other vehicle parts. Regularly maintain your vehicle with the help of an auto mechanic to identify potential issues in the early stages.

Regularly checking your oil level will help you avoid overheating the engine and ruined bearings. To ensure the engine receives enough air to operate correctly, replace your air filter every 20k miles.

To prevent accidents, check your tires frequently for damage and wear. Keep your vehicle clean to stop contaminants from gathering and causing early wear and tear.

Leave a Comment