How Do I Remove Window Tint from My Car Windows

Window tint is a thin film or coating that is used on the car’s glass surface to reduce inside heat and glare from sunlight. But with time, the tint peels, bubbles, or degrades. Therefore, it requires removal or replacement.

If you are bored with the window tint color or the tint is bubbling or deteriorating, you may want to remove it. So, how do you remove window tint from the car windows? Don’t worry; it is an easy process that can be done at home.

Although removing window tint does not require special mechanical knowledge, you should be careful to protect the glass from damage. In this article, I have explained three simple methods with the necessary steps to help you remove window tint from the car.

First, gather all the necessary items to start the process. To remove tint from the car window, the following items are required:

  • Heat gun
  • A razor blade or a plastic scraper
  • Ammonia-based window cleaner
  • Liquid dish soap
  • A microfiber cloth

These are the five common items that are used in different methods to remove window tint. Not all the items are required at the same time; you can pick one for a specific process.

There are 3 easy methods of removing tint from the car window, which include using a heat gun or hair dryer, using ammonia-based window cleaner, and using dish soap.

But you need to clean the car window properly before applying the methods.

Method 1: Removing Tint with Heat Gun

This is the most commonly used method to remove window tint from car windows. It requires an extension cord and proper patience. This is a popular process because it does not require many ingredients, like dish soap and ammonia solutions.

In this method, you can use a heat gun or hair dryer as you wish. When heating one window, roll down the others. Heat all corners of the window tint properly.

Heating the corners will make the window tint curl and make it easier to peel the tint off. When removing the tint, continuously apply heat to the surrounding area.

Keep the heat gun 3-5 inches away from the glass surface when applying heat. Go ahead in the same way until you are able to remove the window tint completely.

When the tint is completely removed, apply the glass cleaner again and clean the window properly. You can also use an eraser blade to remove old glue.

Warning: Take your time and remove the tint patiently to prevent glass damage.

Watch this video to learn how to remove window tint using a hair dryer:

Method 2: Removing Window Tint with Ammonia

Ammonia is typically used to remove glass stickers. But it is also applicable as a window cleaning item. In this process, first, mask the window frame and door panels to protect them from ammonia.

Use plastic sheeting to cover the door panels and tape them correctly. Do not use paper or any other type of material because ammonia will quickly soak through it.

Now, cover the windows with black garbage bags. Cut the bags to fit them on the windows properly. The next step is to spray the ammonia on the windows and then cover them with the bags.

Spray ammonia inside the window and cover the glass. Use masking tape to secure the trash bags properly. As a safety precaution, wear a mask and gloves when working with ammonia.

Repeat the process in all windows and keep the ammonia for 1-2 hours. This process greatly works on hot summer days.

After 1-2 hours, remove the trash bags and peel off the window tint away with the help of a razor. Remove the window tint patiently and carefully. After removing the tint, clean the glasses like method 1.

Watch this video to learn how to remove window tint with ammonia:

Method 3: Dish Soap Window Tint Solution

In this method, first, clean the windows properly, then apply the dish soap. Scrap the tint slowly with the help of a razor blade. Do this process very gently to protect widow glasses from any scratch.

This method is typically safer than ammonia. However, you can also take all the safety precautions mentioned in Method 2. This method is perfect for you if you don’t want to use ammonia.

All the steps in this method are similar to Method 2; you are just using dish soap solution here instead of ammonia.

To make dish soap solution, follow these 3 steps below:

  • Take a spray bottle and fill it with three-quarters of water and one-quarter of liquid dish soap.
  • Shake the mixture properly to make a perfect solution.
  • Then, you can use the solution on the windows.

FAQs

How to clean car window?

You can buy or make a window cleaner to clean the car windows. There is an easy DIY method to make windows cleaner at home. It will save you money and time. The easy DIY method of making window cleaner is vinegar solutions. It is the most common window cleaner that is possible to make at home.

The following constituents are required to make the window cleaner:

  • One-fourth cup of rubbing alcohol
  • One-fourth cup of white vinegar
  • Half-litter of water
  • One tbsp cornstarch
  • 9-10 drops of lemon essential oil

Mix the items in a bottle and pour them into a spray flush. Spray the solution around all the areas of the tinted glass and wipe them after a minute. This solution works great on the car windows and cleans around the tinted area perfectly.

After cleaning the car window, start the window tint removal process.

What is the easiest way to remove tint from car windows?

In my recommendation, using a steamer or heat gun is the easiest way to remove the tint from the car window. This is the least damaging way and does not require any chemical solution.

Just keep patient, apply heat on the tint, and slowly remove it from the car windows. After removing the window tint, use a glass cleaner and a razor blade to clean the old glue.

Does WD 40 remove tint?

Yes, WD 40 can be used to remove tint from windows. However, the WD 40 has some issues, like it leaves some oil on the window surface, which accumulates dust.

So, if possible, use some other methods to remove window tint. The methods mentioned in this article are far better than using WD 40 to remove tint.

How do you remove tint adhesive from a car?

There are 3 best ways to remove tint adhesive from a car, including:

  1. Using heat gun
  2. Using ammonia
  3. Using dish soap solutions

These methods require only $2-$3 and remove the window tint perfectly.

Does vinegar remove window tint?

Some owners use vinegar to remove window tint. Both ammonia and vinegar are used to remove tint. The ammonia is a mild base, while the vinegar is a mild acid.

Typically, ammonia is more effective than vinegar to remove tint. But people love to use vinegar because it is safer than ammonia. However, using vinegar or ammonia to remove tint is up to you, but use them in a proper amount.

Excessive amounts of ammonia or vinegar may cause damage to the windows.

How long does it take to remove old tint?

Removing old tint is a time-consuming process and must be done with patience. Generally, it takes 2-3 hours to remove tint from all windows. To protect car windows, make sure you use the tint-removing method correctly and gradually.

Leave a Comment